Specifications & Standards
FlameShield™ Pure Silicone Tape meets many or
all of the specifications of the following standards:
MIL-I-46852, MIL A-A-59163, ASTM D412, ASTM D 119, ASTM D150, ASTM D624, ASTM D2148, ASTM D2240.
FlameShield™ Pure Silicone Tape may also be certified to the following upon request (fees apply):
MIL-I-46852C Type I & II, A-A-59163 Type I & II, MIL-I-22444C, Boeing DMS2186 Type I & II, Lockheed Martin MMS J517 & 5-00857, General Electric A50A493 / A50E112 / P5384, Rohr RMS315, FAR 25.853, UL / CSA.
The proprietary silicone formulation provides optimal thermal dispersion & contains
no flammable dyes.
Storage & Shelf Life
FlameShield™ Pure Silicone Tape should be stored at room temperatue (70°F) and between 30 to 50% relative humidity. Storage at over 125°F can result in a reduction of bond strength and adhesion when used. Shelf life is recommended at 4 years from batch date on packaging.
High-Temperature Aviation Silicone Tape
Specifications for FlameGuard™
Triangular Profile Silicone Tape (MIL-I-46852 Type II & A-A-59163 Type II) |
|
Property |
Standard |
Test Result
or Tolerance |
Test Method |
|
Thickness: ABST-16 |
.020" (20 mil) Centre |
+/- .002" |
|
|
Width: ABST-16 |
1.00" |
+/- .020" |
|
|
Length |
36 feet |
+/- 6.00" |
|
|
Colour |
Oxide Red or Black |
N/A |
|
|
Guideline Color |
Blue |
N/A |
|
|
Operating Temperature |
-60ºC to +260ºC
-76ºC to +500ºF |
|
|
|
Shipping Weight: ABST-16 |
140g / 5oz |
|
|
|
Brittle Temperature |
-65ºC / -85ºF |
|
|
|
Interleave Material |
.002" thick Mylar |
|
|
|
Tensile Strength |
700 psi (minimum) |
1100 |
ASTM D412 / D119 |
|
Dielectric Strength |
400 V/mil (.001") |
575 |
MIL-I-46852
MIL A-A-59163
ASTM D-149 |
|
Dielectric Constant |
|
2.94 @ 1KHz |
ASTM D150 |
|
Resistance |
|
3 x 1014 ohms/cm3 |
MIL-I-46852 |
|
Elongation |
300% (minimum) |
700 |
ASTM D412 / D119 |
|
Tear Strength |
85 psi (minimum) |
146 |
ASTM D624 |
|
Bond Strength (1" width) |
2 lbs (minimum) |
5.5 |
MIL-I-46852
ASTM D2148 |
|
Adhesion |
Shall not unwind more
than 1.0" after 3 minutes
with 600g load |
0.12" |
ASTM D2148 |
|
Inclined Mandrel Tack Test (inch) |
|
0.25 |
ASTM D2148 |
|
Water Absorption (by wt) |
3% (maximum) |
0.9% |
MIL-I-46852 |
|
Dissipation Factor |
|
<0.0004 @ 1 KHz |
ASTM D150 |
Hardness, durometer
Shore A |
55-65 |
55 |
ASTM D2148
ASTM D2240 |
FlameShield™
Aviation Silicone Tape is
Self-Fusing / Self-Bonding
and non-flammable.
FlameShield™ Avionics
Silicone Tape is available
in a 1" / 25mm and
1.5" / 37mm width.
Each roll contains
432" / 36' / 10.9m of tape.
FlameShield™ Aviation Silicone Tape
for Aviation & Avionics Wiring Use.
Non-flammable & self-extinguishing.
We Accept:
PRICE
Type I is $34.71 per roll
Type II is $33.80 per roll
Certification:
$6.00 per roll
$10.00 per lot / batch
Available in Oxide-Red and Black
Contact us for volume
discounts when
purchasing 10 rolls
or more
AB Technology Group
431 State St. Box 1491, Ogdensburg, NY 13669 USA
116 Albert St - Suite 300, Ottawa, ON K1P 5G3 CANADA
Tel: (610) 906-3549 Fax: (905) 697-9918